Whois & Analysis for amanatool.com

CNC router (Or Computer Numerical Control router) is a computer-controlled cutting machine related to the hand held router used for cutting various hard materials, such as wood, composites, aluminium, steel, plastics, and foams.

CNC stands for computer numerical control.

CNC routers can perform the tasks of many carpentry shop machines such as the panel saw, the spindle moulder, and the boring machine.

They can also cut mortises and tenons.

A jointer or in some configurations, a jointer-planer (also known in the UK and Australia as a planer or surface planer, and sometimes also as a buzzer or flat top) is a woodworking machine used to produce a flat surface along a board's length.

As a jointer, the machine operates on the narrow edge of boards, preparing them for use as butt joints or gluing into panels.

A planer-jointer setup has the width that enables smoothing ('surface planing') and leveling the faces (widths) of boards small enough to fit the tables.

A shaper is a type of machine tool that uses relative motion between the workpiece and a single-point cutting tool to machine a linear toolpath.

Its cut is analogous to that of a lathe, except that it is (archetypally) linear instead of helical.

A planer is a type of metalworking machine tool that uses relative motion between the workpiece and a single-point cutting tool to cut the work piece.

A planer is similar to a shaper, but larger, and with workpiece moving, whereas in a shaper the cutting tool moves.

Drill bits are cutting tools used to remove material to create holes, almost always of circular cross-section.

Drill bits come in many sizes and shape and can create different kinds of holes in many different materials.

In order to create holes drill bits are attached to a drill, which powers them to cut through the workpiece, typically by rotation.

The drill will grasp the upper end of a bit called the shank in the chuck.