Whois & Analysis for autotk.com

Torque, moment, or moment of force (see the below) is rotational force.

Just as a linear force is a push or a pull, a torque can be thought of as a.

Horsepower (hp) is a unit of measurement of power (the rate at which work is done).

There are many different standards and types of horsepower.

Two common definitions being used today are the mechanical horsepower (or imperial horsepower), which is approximately 746 watts, and the metric horsepower, which is approximately 735.5 watts.

Electronic throttle control (ETC) is an automobile technology which electronically "connects" the accelerator pedal to the throttle, replacing a mechanical linkage.

A typical ETC system consists of three major components: (i) an accelerator pedal module (ideally with two or more independent sensors), (ii) a throttle valve that can be opened and closed by an electric motor (sometimes referred to as an electric or electronic throttle body (ETB)), and (iii) a powertrain or engine control module (PCM or ECM).

The ECM is a type of electronic control unit (ECU), which is an embedded system that employs software to determine the required throttle position by calculations from data measured by other sensors, including the accelerator pedal position sensors, engine speed sensor, vehicle speed sensor, and cruise control switches.

The electric motor is then used to open the throttle valve to the desired angle via a closed-loop control algorithm within the ECM.

Iron Horse Bicycles was a manufacturer of bicycles, in Islandia, New York, United States from 1987 to 2009.

Its logo was a prancing horse on a mustard-color crest similar to the Ferrari logo.

Iron Horse sold racing bikes and mountain bikes, but mainly downhill, freeride, and all mountain.

Fuel efficiency is a form of thermal efficiency, meaning the efficiency of a process that converts chemical potential energy contained in a carrier fuel into kinetic energy or work.

Overall fuel efficiency may vary per device, which in turn may vary per application fuel efficiency, especially fossil fuel power plants or industries dealing with combustion, such as ammonia production during the Haber process.